Details

---

MAHR – Dimensionair ® Air Gages (Single Master System)
Brand: Mahr
 
Features:

• Uses regular shop air (40 - 1s0 psig).
• lnternal pressure regulator keeps measuring pressures within calibrated range.
• Adjust meter to zero using a single setting master and the zero setting screw.
• High visioility meter has fine line graduations and a needle-thin hand for clear, precise readings. An air filter is included to remove dust and dirt contaminants from airline.
• Tooling mounts to the front of the unit. Connections are tight with finger pressure.
• No recalibration necessary when changing tooling. Just set zero and measure!
• Models available in 5 magnifications, 2 dial styles, and either Metric or lnch.

 
Technical Data:

Magnification	Tooling ID no.	Range	Minimum Graduation	Dial Style	Surface Finish (recommended)			Maximum Part Tolerance (recommended)	Order no.
					µin Ra	/	µm Ra
1250: 1	100	.006”	.0001”	Regular 82.6 mm/ 3.25” diameter	100	/	2.54	±.002”	2095183
2500: 1	50	.003”	.00005”		50	/	1.27	±.001”	2095184*
5000: 1	20	.0015”	.00002”		20	/	0.50	±.0005”	2095185*
10000: 1	10	.0006”	.00001”		10	/	0.25	±.0002”	2095186
20000: 1	5	.0003”	.000005”		5	/	0.12	±.0001”	2095189
1250: 1M	100	152 µm	2 µm		100	/	2.54	±50 µm	2095190
2500: 1M	50	76 µm	1 µm		50	/	1.27	±25 µm	2095191*
5000: 1M	20	38 µm	0.5 µm		20	/	0.50	±13.5 µm	2095192*
10000: 1M	10	15.2 µm	0.2 µm		10	/	0.25	±5 µm	2095193
20000: 1M	5	7.6 µm	0.1 µm		5	/	0.12	±2.5 µm	2095194
4000: 1	50	.003”	.000025”	Large 152.4 mm/ 6” diameter	50	/	1.27	±.001”	2095195*
8000: 1	20	.0015”	.000010”		20	/	0.50	±.0005”	2095196*
16000: 1	10	.0006”	.000010”		10	/	0.25	±.0002”	2095197
32000: 1	5	.0003”	.000005”		5	/	0.12	±.0001”	2095198
4000: 1M	50	76 µm	0.5 µm		50	/	1.27	±25 µm	2095199*
8000: 1M	20	38 µm	0.2 µm		20	/	0.50	±13.5 µm	2095200*
16000: 1M	10	15.2 µm	0.2 µm		10	/	0.25	±5 µm	2095201
32000: 1M	5	7.6 µm	0.1 µm		5	/	0.12	±2.5 µm	2095202