Details

---

CEDAR - Digital Torque Wrench (DIW Series)
Brand: Cedar
Model: DIW-15, DIW-20, DIW-75, DIW-120
 
Features:

• Ergonomic, light weight, rugged metal construction
• Wrench head swivels 300°
• Peak, Real Time and Peak Down measuring mode (selectable)
• 800 data memory
• Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing
• Both CW and CCW operation
• USB output (ASCII format)
• Runs on internal Ni-MH batteries (12-hour use)
• CW step-less one-way clutch adapter (DIW-20/75/120 only), AC charger and carrying case included.

Specifications:

Model			DIW-15	DIW-20	DIW-75	DIW-120
Accuracy guarantee range	N/m		0.20～15	0.20～20	0.20～75	2.0～120
	kgf/cm		2.0～150	2.0～200	2.0～750	20～1200
	lbf/in		2.0～130	2.0～174	2.0～651	20～1040
Accuracy			Reading ±0.5% (199 or less digit±1digit)	Reading ±0.5% (499 or less digit±3digit)		Reading ±0.5% (199 or less digit±1digit)
Display			The 4 figures digital display of LCD
Measurement direction			CW-CCW (right and left)
Measurement Mode		PP	peak to peak          The highest value of load is hold-displayed.
		TR	track      A display also changes with load change.
		PD	peak-down Load catches and displays the moment included in descent from a rise.
		C	Real-time Output Load torque value is outputted every about1/160 second.
A success or failure judging function			High and low value are measurement within the limits, and can be set up. Five-set preservation is possible.
The Maximum, minimum, and the average value			The data number, the maximum, the minimum value, and the average value of memory data are displayed.
Data memory counts			800 data
Data output			ASCII format (baud rate 19200)
auto clear time			If the set-up time comes, measurement value will be automatically cleared in 0.0~3.0 seconds (0.5s interval).
Setup of count			1 to 99 count   (count in a clockwise direction)
Power supply			Ni-MH chargeable battery 1.2V×4cells 800mAh
Charge time / use time			Charge 5 hour /, continuation about 12-hour use
Auto-power-off			After the neglect during 10 minutes
Bit / Socket part			□6.35	□9.5		□12.7
Weight (about)			430g	470g	620g	830g
Accessories (one piece each)			One-way socket
			Exclusive charger
			Result of calibration document Certification on calibration document / Traceability system figure
Option			When outputting data, the USB cable (mini B) is needed.